BWJHG - O-641 1,2-DIBROMOETHANE
- MSDS: BWJHG
- Manufacturer: CHEM SERVICE INC
- Product Name: O-641 1,2-DIBROMOETHANE
- National Stock Number: 6550-00F037534
Product Identification
Product ID:O-641 1,2-DIBROMOETHANE
MSDS Date:12/23/1992
FSC:6550
NIIN:00F037534
MSDS Number: BWJHG
Responsible Party
WEST CHESTER, PA 19381-3108
US
Emergency Phone: 215-692-3026/800-452-9994
Info Phone: 215-692-3026/800-452-9994
Cage: 84898
Contractor
Telephone: 610-692-3026
Cage: 8Y898
Ingredients
DIBROMOETHANE, ETHYLENE DIBROMIDE, 1,2-DIBROMOETHANE
CAS: 106-93-4
RTECS: KH9275000
OSHA PEL 20 PPM
ACGIH TLV: A2 CARCINOGEN
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT/MOUSE): 108 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY BE HARMFUL, CAN CAUSE
ALLERGIC RESPIRATORY REACTION. SKIN: MAY BE HARMFUL IF ABSORBED,
CAN CAUSE IRRITATION, ALLERGIC REACTION. EYES: IRRITATION.
INGESTION: MAY BE HARMFUL.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION.
First Aid
First Aid:EYES: FLUSH CONTINUOUSLY W/WATER FOR 15-20 MINS. SKIN: FLUSH
W/WATER FOR 15-20 MINS. IF NOT BURNED, WASH W/SOAP & WATER TO
CLEANSE. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED
& CONTINU E UNTIL MEDICAL ASSISTANCE ARRIVES. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:CO2, DRY CHEMICAL POWDER/SPRAY.
Accidental Release
Spill Release Procedures:EVACUATE AREA. WEAR APPRORPRIATE OSHA
REGULATED EQUIPMENT. VENTILATE AREA. ABSORB ON VERMICULITE/SIMILAR
MATERIAL. SWEEP UP & PLACE IN APPROPRIATE CONTAINER/HOLD FOR
DISPOSAL. WASH CONTAMINATED SURFAC ES TO REMOVE ANY RESIDUES.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE ONLY
W/COMPATIBLE CHEMICALS. KEEP TIGHTLY CLOSED. DON'T USE
MAGNESIUM/ALUMINUM/THEIR ALLOYS AS CONTAINERS.
Other Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING. DON'T BREATH
VAPORS. CONTACT LENSES SHOULDN'T BE WORN IN THE LABORATORY. FOR
LABORATORY USE ONLY. ALL CHEMICALS SHOULD BE CONSIDERED HAZARDOUS.
AVOID DIRECT PHYS ICAL CONTACT.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE OSHA/MSHA APPROVED SAFETY
EQUIPMENT.
Ventilation:CHEMICAL SHOULD BE HANDLED ONLY IN A HOOD.
Eye Protection:EYE SHIELDS
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:269.6F
Melt/Freeze Pt:M.P/F.P Text:50F
Vapor Pres:11
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQUID W/ETHER LIKE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES/OXIDIZING AGENTS, MAGNESIUM, ALUMINUM.
Hazardous Decomposition Products:TOXIC FUMES. DECOMPOSITION PRODUCTS
ARE CORROSIVE.
Disposal
Waste Disposal Methods:BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AN
AFTERBURNER & SCRUBBER IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.